ProductsNetworksFeedback Contact
     
Home
Mega Toughset - B
There are two component (Resin and Hardener) epoxy formulation. Resin component is grey in color and hardener component is white in color.

The Resin and hardener component are required to be mixed in the ratio 10:8 by weight or 1:1 by volume to a uniform white mixture devoid of any greyish streaks before use. The consistency of the mixture is such that it can be applied with a screw driver, spatula or brush. It doesnot flow or sag after application. The resin and hardener mixture sets to a tough, resilient mass having exellent adhesion to metals, plastics, rubber, aggregate surfaces and also has excellent insulating and sealing properties.
General Purpose Epoxy Compound
 

It can be advantageously used for:

  • As an Insulation Compound: Atmospheric action on aluminium / copper conductors of overhead service connections, jumpers, tappings for strret lights etc. leads to oxidation, corrosion and loosening of these joints resulting in improper power supply, leading to open circuits and damage to main conductors.It is ideal for protecting these joints from atmospheric effects as well as form loosening. Due to inherent resilience, it does not crack due to relative movement of the conductors. It is ideal for preventing flashovers between Bus bars / Metal enclosures, jumper wires etc. caused by vermin, rodents and birds. Due to its consistency, it can be easily applied on BUs bars and built up to an adequate thickness to provide complete insulation upto 11KV. Normally, two coats, the second cost to be applied after the first one has cured, should be adequate.

  • As a sealing & repairing compound: It can be used effectively for permanent weather-proofing and preventing ingress of moisture in power cable ends, motor terminal boxes, starters, junction boxes etc. It is also suitable for repairing cracks in pipes, drums, tanks etc. It bonds well to variety of materials like steel, aluminium, ceramics, wood, rubber etc. In conjunction with fibreglass tope / cloth, it can also be used for repairs of high pressure pipelines.
  • PHYSICAL PROPERTIES

    Product Hardness Store - D. Elongation at break Comparative track resistance Flexural kg./cm2 Tensile kg./cm2 Setting time Tensile Adhesive MS to MS kg./cm2 Shear Adhesive MS to MS kg./cm2 Dielectrical Strength Kv/mm Complete cure
    Toughset - B 80-82 9% KB 550 195 125 Tack free 3/4 hrs. 145 135 14 24 hrs.

     
    Site By McCoy